VERKLINE TRS 001 Front Track Rods Kit for AUDI RS2 / S2 (B4)

Rods can be adjusted to fit any suspension settings including longer wishbones.

Motorsport tie rod ends will withhold any stress while the car is on the track or bumpy gravel road. Locknuts on every end of the stick will enable precision alignment of the suspension.

All non-OEM parts necessary for the installation are supplied in the kit.

What’s Included

• One set (two pieces) of front track rods with inox finish.
• Four motorsport tie rod ends.
• Steel machined tie rod end adapters to fit to stock uprights (B3/B4 type).
• Self-locking nuts.
• Four rubber sealing boots.

Features

• Works with stock OEM or Audi Sport wishbones.
• 25 mm thick steering rods powder painted in black.
• Inox screws for 22 wrench from each side.
• Locknuts for securing the motorsport joints.
• Galvanized tire rod end adapters for fitting bearing carriers.

Notice: Some clearancing of the steering rack bracket may be necessary to prevent binding or interference, depending on your suspension settings. Usually not needed unless you have large caster setup.

USD : 75.0